Martin Fence Co.

Quotation Form
South Florida Installations
We offer 2 ways for requesting a Quotation. The first is a simpler form but is limited to a 4 sided fence. The second allows up to 10 different stretches of fence

Step 1:

A stretch is defined as an individual straight line of fence unbroken by gates or other end posts. All entries must be in feet (no fractions). Any place where the fence changes direction ends one stretch and starts another. A gate placed in a stretch actually creates two separate stretches (except on either extreme end of a line of fence). Chain link is 'stretched' from end post to end post (gateposts or corner posts serve as end posts for this purpose). The most common mistake is to ignore the fact that a gate, if positioned within one line of fence, creates two individual stretches, one on each side of the gate. This fact will affect the quantity of line posts that are needed on each side as well as the number of fittings to connect the chain link to terminal posts. A terminal post is normally a larger diameter than the line posts. They are also called end, corner, and gates posts.

Stretch 1 Stretch 2 Stretch 3 Stretch 4 Stretch 5

Stretch 6 Stretch 7 Stretch 8 Stretch 9 Stretch 10

We have set the limit at 10 Stretches. For a more comprehensive quote, please call our office.

Step 2:

Number of end, corner and gateposts

(Do not figure intermediate or line posts... we will - 10' apart)

Step 3:

Quantity feet wide.........Single Walk Gates

Quantity feet wide......Double Swing Gates

Step 4:

feet....Choose height of fence

Step 5:

Choose gauge of chain link

Step 6:

Name :
Phone :
E-Mail :
Address :

City :

State :

Zip :

Additional Information

Step 7:

'Click' on SEND or RESET to start over

E-Mail the Information Reset All Values to '0'